Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Henry's on a motor
Options
Jesse Markeveys
Member Posts: 9
How do you figure out how many henry's a motor has? I will be using this equation to figure out the inductive reactance that a motor has.
0
Comments
-
Depends
on if it's 1 phz or 3 phz/ alternating or direct current.. Any Electrical supply house has a book called "Ugly's Electrical References" Great for what you are doing. Cost about 20 or 30.00.Example of 3 phz equation...HP = Volts X Amps X power factor X 1.73 (Divided by) 746
Mike T0 -
Mike, you're amazing!0 -
Actually,...
The book is amazing. It is PACKED with useful information, conversion charts and all laws of electrical relevance. I am merely a reader ;-)
Thanks anyways Carol for the Jack up....;-)
Mike T.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements