Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Henry's on a motor
Jesse Markeveys
Member Posts: 9
How do you figure out how many henry's a motor has? I will be using this equation to figure out the inductive reactance that a motor has.
0
Comments
-
Depends
on if it's 1 phz or 3 phz/ alternating or direct current.. Any Electrical supply house has a book called "Ugly's Electrical References" Great for what you are doing. Cost about 20 or 30.00.Example of 3 phz equation...HP = Volts X Amps X power factor X 1.73 (Divided by) 746
Mike T0 -
Mike, you're amazing!0 -
Actually,...
The book is amazing. It is PACKED with useful information, conversion charts and all laws of electrical relevance. I am merely a reader ;-)
Thanks anyways Carol for the Jack up....;-)
Mike T.0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 927 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements