Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Concrete Sensors

Options
Joe_75
Joe_75 Member Posts: 57
in THE MAIN WALL
Does anyone know the best way to install concrete sensors in a pad that has already been poured? I looked at a job today that was using a tstat in the mech room to control the snow melt. I was going to try and find the lines along a wall and roto hammer a hole for the sensors. Any thoughts or ideas?

Thanks Joe

Comments

  • Weezbo
    Weezbo Member Posts: 6,231
    Hot Rod or Mark have had Snow melt remedial 401 :)

    i keep steering away after a brief encounter with a steel pipe system in the 70's...that sorta put me off as it were of fixing any more of those sort of blessings....
This discussion has been closed.

Categories