Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Honeywell L-7148F-1026
Options
Empire_2
Member Posts: 2,343
I actually went to Honeywell site and they state that the control is obsolete. No cross reff's were recommended. Sorry I could not help you. I assume you are working with a digital control..? I don't have the manual for basic DC temp (vs) resistance, but if you can find some reference to this you can get close. (Maxitrol) is a great place to start.
Mike T.
Mike T.
0
Comments
-
For the Honeywell
Electronic Aquastat L7148F what should the resistance readings be on the Thermister Sensor?0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements