Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Honeywell L-7148F-1026
I actually went to Honeywell site and they state that the control is obsolete. No cross reff's were recommended. Sorry I could not help you. I assume you are working with a digital control..? I don't have the manual for basic DC temp (vs) resistance, but if you can find some reference to this you can get close. (Maxitrol) is a great place to start.
Mike T.
Mike T.
0
Comments
-
For the Honeywell
Electronic Aquastat L7148F what should the resistance readings be on the Thermister Sensor?0
This discussion has been closed.
Categories
- 113.5K All Categories
- 81.4K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 37 Biomass
- 394 Carbon Monoxide Awareness
- 2.7K Controls
- 1.4K Domestic Hot Water
- 3.9K Gas Heating
- 101 Geothermal
- 136 Indoor-Air Quality
- 2.4K Oil Heating
- 34 Pipe Deterioration
- 594 Plumbing
- 4.4K Radiant Heating
- 335 Solar
- 12.4K Strictly Steam
- 41 Water Quality
- 20 Industry Classes
- 56 Job Opportunities
- 8 Recall Announcements