Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Heating Mains
Options
Weezbo
Member Posts: 6,231
two young ladies decided to pipe with cpvc luckily for them the entire place froze up before they got it running.
closest off the wall thing that i remember doing was piping in high pressure air through ABS to get a sewage treatment plant up and running in some less than desireable location of the planet....
closest off the wall thing that i remember doing was piping in high pressure air through ABS to get a sewage treatment plant up and running in some less than desireable location of the planet....
0
Comments
-
Heating Mains
Has anyone used PVC sch40 pipe for radiant mains instead of copper or steel.If not why not?
Thanks
Dobber0 -
no
but our new guy who is from poland said that his grandmothers house there is piped in pvc and that it is common in euro heating.
why not pex though?0 -
Pex
It's going in a car wash mechanical room so it will be easier to support.
Thanks, Dobber0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements