Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Heating Mains
Weezbo
Member Posts: 6,232
two young ladies decided to pipe with cpvc luckily for them the entire place froze up before they got it running.
closest off the wall thing that i remember doing was piping in high pressure air through ABS to get a sewage treatment plant up and running in some less than desireable location of the planet....
closest off the wall thing that i remember doing was piping in high pressure air through ABS to get a sewage treatment plant up and running in some less than desireable location of the planet....
0
Comments
-
Heating Mains
Has anyone used PVC sch40 pipe for radiant mains instead of copper or steel.If not why not?
Thanks
Dobber0 -
no
but our new guy who is from poland said that his grandmothers house there is piped in pvc and that it is common in euro heating.
why not pex though?0 -
Pex
It's going in a car wash mechanical room so it will be easier to support.
Thanks, Dobber0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements