New Weil?

kevin coppinger_4 · January 2005

from a general conractor who attended a trade show in FLA. that weil-Mc is comming out with a new boiler in the spring...from the sounds of it it is a three pass/ scotch marine design aka Buderus/Biasi/viessman. kpc

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=323&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Maine Ken · January 2005

They are being tested in residences right now, should be out soon. Burnham has reportedly done the same thing. Almost sounds like all the chest thumping about pin type single pass boilers being the best, just as effecient, etc might be over... or it could be those companies losing market share to veissman, buderus, biasi, pensotti etc!!!!!

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

paul sr · January 2005

we have one in our shop, condenses big time!!

Kal Row · January 2005

nobody is talking about how...

does the flue gas get pushed into a tighter area as it progresses away from the fire to get condensing at higher temps because of the higher pressure,

or, do they seperate the flue gas solution (of H2O and CO2), to get the h2o part to condense closer to the normal 212 rather than the 136 it does in solution?

i just have to know ;(

kevin coppinger_4 · January 2005

Where are the ....

pictures! Don't tease me like that...What type of burner? AFUE? kpc

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Rookie · January 2005

Pensotta

Ken do you install Pensotti ?, we have no suppliers down here, sometimes we have to go up to Steve Cole's place and get them.

Maine Ken · January 2005

Install lots of em. Get them from Redlon & Johnson and Coastal Winair. Haven't used one with the new controls yet. Soon I hope.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

New Weil?

Comments

Categories