Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

cleaning oil furnace blower wheel

Options
joeIDIY
joeIDIY Member Posts: 1
in THE MAIN WALL
Please advise of solvent to use for cleaning blower wheel and housing for oil furnace. Cleaners for automobile use seem to hang around and stink up the house.

Comments

  • lchmb
    lchmb Member Posts: 2,997
    well

    a rag, a brush and a vac do the trick. I don't like to spray anything in there. Only thing I do is oil the motor if it has a port...scrape out the fin's and vac it up..:)
    On a safety note, make sure you have the power off before you stick your finger's in anywhere!!!!
  • Leo
    Leo Member Posts: 772


    I remove the motor, use a bottle type brush on the wheel (the same size one I use for gauge glasses). If it is oily and needs to be cleaned with solvent then there is an oil leak that needs to be addressed.

    Leo
This discussion has been closed.

Categories