Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
please explain this product
Options
R. Kalia
Member Posts: 349
<a href="http://intellidynellc.com/res_hw.htm">
Does this make sense? Does is work? Will the water be too cold for a cast-iron boiler? Sorry, newbie questions.
Does this make sense? Does is work? Will the water be too cold for a cast-iron boiler? Sorry, newbie questions.
0
Comments
-
-
http://intellidynellc.com/res_hw.htm
Does this make sense? Does it work? Will the water be too cold for a cast-iron boiler? Sorry, newbie questions.0 -
-
-
Just realized that this is the same product as the
Becket heatmanager
My questions are still relevant though.
I don't understand if it is getting heat load feedback by measuring the return water temperature---it doesn't quite say that.
And if it can expand the deadband, why doesn't it just lower the max temp instead? (I realize this would not reduce short-cycling.)
0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements