Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
dan/steamhead bushings
Options
joe_14
Member Posts: 138
can anyone help me find these bushing, iam looking for an 11/4 by 1/2 double tap bushing. i want to hook up a condensate loop using these bushing as explained in dans book HOW COME on page170. our parts guy said they dont make these i told him he was crazy. he said thats what the supply house told him. any help would be appreciated.
thanks joe g.
p.s. i live in southeast new hampshire.
thanks joe g.
p.s. i live in southeast new hampshire.
0
Comments
-
R.E.Michel
carries double-tapped bushings. They don't have 1-1/4x1/2, but do carry 1x1/2 which you could screw into a standard 1-1/4x1 bushing. Catalog number is 1K321.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
thanks
thanks steamhead i know i could count on you0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements