Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
dan/steamhead bushings
joe_14
Member Posts: 138
can anyone help me find these bushing, iam looking for an 11/4 by 1/2 double tap bushing. i want to hook up a condensate loop using these bushing as explained in dans book HOW COME on page170. our parts guy said they dont make these i told him he was crazy. he said thats what the supply house told him. any help would be appreciated.
thanks joe g.
p.s. i live in southeast new hampshire.
thanks joe g.
p.s. i live in southeast new hampshire.
0
Comments
-
R.E.Michel
carries double-tapped bushings. They don't have 1-1/4x1/2, but do carry 1x1/2 which you could screw into a standard 1-1/4x1 bushing. Catalog number is 1K321.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
thanks
thanks steamhead i know i could count on you0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements