Right Angle steam radiator vavles

Louie · November 2003

Guy's, I have a problem. I looked at a steam job that was
done in the early 1900's with supply valves that have 3/4 in
and 1/2 out to the radiator.

This is two pipe system. 28 of them and most of them are seized. Customer wants me to replace them all but I cant find any so far with that configuration.

Help! Thanks,
Louie

bob young · November 2003

check with Starbuck in mass.

Steamhead · November 2003

Try Tunstall

www.tunstall-inc.com . They say they can rebuild any valve. This would avoid the need to replace them all. Talk to Tom Tunstall and tell him I sent you.

That sounds like some sort of Vapor system- any names or other info on the valves or other hardware?

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Right Angle steam radiator vavles

Comments

Categories