Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Right Angle steam radiator vavles
Louie
Member Posts: 18
Guy's, I have a problem. I looked at a steam job that was
done in the early 1900's with supply valves that have 3/4 in
and 1/2 out to the radiator.
This is two pipe system. 28 of them and most of them are seized. Customer wants me to replace them all but I cant find any so far with that configuration.
Help! Thanks,
Louie
done in the early 1900's with supply valves that have 3/4 in
and 1/2 out to the radiator.
This is two pipe system. 28 of them and most of them are seized. Customer wants me to replace them all but I cant find any so far with that configuration.
Help! Thanks,
Louie
0
Comments
-
check with Starbuck in mass.0 -
Try Tunstall
www.tunstall-inc.com . They say they can rebuild any valve. This would avoid the need to replace them all. Talk to Tom Tunstall and tell him I sent you.
That sounds like some sort of Vapor system- any names or other info on the valves or other hardware?
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 893 Plumbing
- 5.9K Radiant Heating
- 379 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements