Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Swedge fittings

Options
Richard D._2
Richard D._2 Member Posts: 156
in THE MAIN WALL
Hot Rod for the info...Richard

Comments

  • Richard D._2
    Richard D._2 Member Posts: 156
    Hey Hot Rod

    Missed your post about your swedge joints!!Was it quicker??Any cracking of the tubing??Does M pipe swedge with any problems??Is it faster when you get used to it?? Thanks Richard
  • hot_rod
    hot_rod Member Posts: 25,331
    Swedge options

    To use the hand one you need to heat and soften the tube.

    This nifty REMS electric one will swedge with just a squeeze of the trigger without softening, although the tube gets smokin hot while it expands:) (wish it were cordless) It also doubles as a tee puller.

    hot rod
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Bob_19
    Bob_19 Member Posts: 94
    Is This

    the same as swaging soft copper?

    I'm just curious, is it called swedging because the tube does not have to be softend?
This discussion has been closed.

Categories