PEX as Conduit

Alan(CaliforniaRadiant)Forbes · July 2003

We just finished laying in the tubing on a job in Berkeley where there is no attic or basement. I had asked the contractor to install some conduit for our thermostat wire, but it hadn't been done by the time we got on the job, so we did it ouselves.............in PEX.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=53&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

Alan(CaliforniaRadiant)Forbes · July 2003

After all the tubing

is installed, the owner comes up to the general contractor and tells him he wants a hydronic towel warmer installed. Uh, no problem (I hope this works)!

We pulled the bathroom loop into a wall, adapted to copper, installed a couple of venturi tees and then back down into the floor.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Alan(CaliforniaRadiant)Forbes · July 2003

Rehau

EVERLOC fittings are great.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Unknown · July 2003

Now thats what I call

2 great ideas . The homeowner is gonna see that and want some custom pex behind the bathroom mirrors too .

PEX as Conduit

Comments

Categories