Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

CO2 cartridge tubing stapler

Options
Johnboy
Johnboy Member Posts: 35
in THE MAIN WALL
Hi guys,
I understand that there is a CO2 powered tubing stapler out ther! Does anyone have any info on these? Your replies are appreciated!

Comments

  • Guy_5
    Guy_5 Member Posts: 159
    Airless Staplers

    I don't know if they make staplers, but I do know that Paslode makes a nice co2/battery powered nail gun. They cost a bit more than a traditional air nailer, but not when you factor out the compressor, hoses,etc.
  • hot_rod
    hot_rod Member Posts: 26,599
    So far

    I have only seen framing and finish nailers in the Paslode airless line up. I asked the rep about a stapler and he indicated there probably isn't enough market.

    We need to find a tool shop that could mate a wide crown driver to a Paslode! Sure would be a handy tool to have.

    Be careful with CO2 guns in confined spaces.

    hot rod

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
This discussion has been closed.

Categories