Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
CO2 cartridge tubing stapler

Johnboy
Member Posts: 35
Hi guys,
I understand that there is a CO2 powered tubing stapler out ther! Does anyone have any info on these? Your replies are appreciated!
I understand that there is a CO2 powered tubing stapler out ther! Does anyone have any info on these? Your replies are appreciated!
0
Comments
-
Airless Staplers
I don't know if they make staplers, but I do know that Paslode makes a nice co2/battery powered nail gun. They cost a bit more than a traditional air nailer, but not when you factor out the compressor, hoses,etc.
0 -
So far
I have only seen framing and finish nailers in the Paslode airless line up. I asked the rep about a stapler and he indicated there probably isn't enough market.
We need to find a tool shop that could mate a wide crown driver to a Paslode! Sure would be a handy tool to have.
Be careful with CO2 guns in confined spaces.
hot rod
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 970 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements