Wirsbo 1\" HePEX

Terry H. · December 2003

Does anyone have a friction loss chart for 1" HePEX with 100% water? I'm doing some calculations and my Wirsbo design manual only has charts for up to 3/4". Or could someone tell me what the pressure loss per foot on 1" is at 20 GPM.

Thanks-A-Lot

Terry H.

Dan_8 · December 2003

Siegenthaler article

This Siegenthaler article:

http://www.pmmag.com/pm/cda/articleinformation/features/bnp__features__item/0,,104831,00+en-uss_01dbc.html

Has PEX up to 1" in it.

Hope that helps.

John Barba1 · December 2003

Terry--

Give me a buzz at the office -- our 5th Edition CDAM has pressure loss charts for PEX up to 1-1/2".

JMB

Terry H. · December 2003

Thanks John

Dominic e-mailed me the charts. And I'll call the rep in the morning to get upgraded from my 2nd edition.

Thanks Again

Terry H.

Wirsbo 1\" HePEX

Comments

Categories