Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Wirsbo 1\" HePEX
Terry H.
Member Posts: 73
Does anyone have a friction loss chart for 1" HePEX with 100% water? I'm doing some calculations and my Wirsbo design manual only has charts for up to 3/4". Or could someone tell me what the pressure loss per foot on 1" is at 20 GPM.
Thanks-A-Lot
Terry H.
Thanks-A-Lot
Terry H.
0
Comments
-
Siegenthaler article
This Siegenthaler article:
http://www.pmmag.com/pm/cda/articleinformation/features/bnp__features__item/0,,104831,00+en-uss_01dbc.html
Has PEX up to 1" in it.
Hope that helps.0 -
Terry--
Give me a buzz at the office -- our 5th Edition CDAM has pressure loss charts for PEX up to 1-1/2".
JMB0 -
Thanks John
Dominic e-mailed me the charts. And I'll call the rep in the morning to get upgraded from my 2nd edition.
Thanks Again
Terry H.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements