Nozzle Info needed for Wayne ER oil burner

Randy Berg_2 · March 2003

I am trying to found what is the correct angle nozzle also solid or hollow for the Wanye ER burner that was made for Weils Mclain. This is a four section boiler M/N P443, which was installed around 1970. Thanks

hombre de oleo · March 2003

I've found narrow and solid work best. Most people replace the gun.60*

[Deleted User] · March 2003

Randy.

Go back to OilTechTalk & your original post. I found my 1967 literature & answered your question w/ all the info you need. It is listed right under your request.

Randy Berg_2 · March 2003

RON THANKS

Randy Berg_2 · March 2003

RON THANKS

Randy Berg_2 · March 2003

Ron, Thanks I got the info.

Nozzle Info needed for Wayne ER oil burner

Comments

Categories