Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Old \"Flue-type\" rads

Options
Mike T., Swampeast MO
Mike T., Swampeast MO Member Posts: 6,928
in THE MAIN WALL
Quite a number available in the San Francisco area via ebay.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2514901085&category=1207

Pricey (by Swampeast MO standards) but we know you're ALL rich out there ;)

Comments

  • Alan(CaliforniaRadiant)Forbes
    Alan(CaliforniaRadiant)Forbes Member Posts: 1,243
    We worked

    on his house when he did his remodel. Radiant in the basement slab; staple-up on the first floor and forced air on the two floors above. He should have re-used those radiators for the upper floors; they are gorgeous.

    He calls them steam radiators, but his old system was hot water.

    Made by T. C. Joy & Co. in Titusville, PA. Nobody on The Wall (including Dan) had ever heard of them.



    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
  • Mike T., Swampeast MO
    Mike T., Swampeast MO Member Posts: 6,928
    Thought I remembered similar...

    ...from a previous picture posted here. At least a year ago?

    A real pity if those wind up making a Howitzer or an Abrams (at least the part that's not depleted uranium).
  • tombig
    tombig Member Posts: 291
    Wow!!

    Those are just gorgeous. I've seen some ornate rads in my time but nothing compared to that. They don't look over painted either. If I track down a used rad for a customer I always have it blasted and primed before install. They look good enough to plug and play.

    Tombig


This discussion has been closed.

Categories