Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Wet-beds & Radiant?
Options
Terry
Member Posts: 186
Preferably AFTER the bed has cured. If you can't wait, start @ low-ambient temperature & SLOWLY ramp up the temp to operating, & I mean SLOW.
if too anxious you will not lke the cracks that may appear.
Regards
Terry
if too anxious you will not lke the cracks that may appear.
Regards
Terry
0
Comments
-
How long...................
How long should I wait before I turn on a radiant system after the wet-bed has been installed?
Thanks for the help,
Jamie0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements