Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Wet-beds & Radiant?

Terry
Member Posts: 186
Preferably AFTER the bed has cured. If you can't wait, start @ low-ambient temperature & SLOWLY ramp up the temp to operating, & I mean SLOW.
if too anxious you will not lke the cracks that may appear.
Regards
Terry
if too anxious you will not lke the cracks that may appear.
Regards
Terry
0
Comments
-
How long...................
How long should I wait before I turn on a radiant system after the wet-bed has been installed?
Thanks for the help,
Jamie0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 976 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements