Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Weil_McLain WGO-3 cleaning brush?

Options
Mark R.
Mark R. Member Posts: 40
in THE MAIN WALL
Does anyone have suggestion for a good brush for cleaning Weil-McLain WGO boilers. I recently used a brush that is about 3/8 - 7/16" diameter, but the spiraled wire shaft was a problem. The shaft diameter was to large. Is there a special brush designed for this series of boilers. I would appreciate any suggestions.
Thanks, Mark R.

Comments

  • Dave Palmer
    Dave Palmer Member Posts: 186
    shop

    around for a thinner handle,they do make them.And buy a tool called a soot sword it has a long narrow blade to fit between the pins.Just remember to brush on a angle and not straight up and down or it will get stuck and your brush should easiery fit
  • John@Reliable
    John@Reliable Member Posts: 379
    GO brush

    Try a Mill-Rose cat.# 84009 it's made for Slant Fin but works great for W/M, Burnham , etc. Looks big but it will do the job! Hope this helps!
  • Mark R.
    Mark R. Member Posts: 40
    Thanks John & Dave

    Thanks for the help with a brush for the W/M. I will try to get one or the other of them. I thought there would be a better brush than them one we used. I really appreciate your help. Mark R.
This discussion has been closed.

Categories