Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Looking for Big Propane torch with ignitor
Options
Boilerpro
Member Posts: 410
Was working with a plumber on a job recently and he had a newer Goss propane torch with a really big tip. He said it worked great for 2 inch copper.... a joint about every 20 seconds. Found some big tipped Prestolite torches, but would like a handle with an ignitor. Anyone know of one?
The Goss may have had and ignitor.
Boilerpro
The Goss may have had and ignitor.
Boilerpro
0
Comments
-
I have one, interchangable tips, TURBO_TORCH. I love it.0 -
I have a Goss
on my actylene B tank. The ignitor is built into the tip which fits into thr Turbo Torch handles also.
I'll bet they make a LP version, although actylene burns much hotter.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0 -
have three
diff tips for mine. I even silsolder up top two inch. Solder up to three. Don't like the igniter though, doesn,t last long0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements