Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Looking for Big Propane torch with ignitor
Boilerpro
Member Posts: 410
Was working with a plumber on a job recently and he had a newer Goss propane torch with a really big tip. He said it worked great for 2 inch copper.... a joint about every 20 seconds. Found some big tipped Prestolite torches, but would like a handle with an ignitor. Anyone know of one?
The Goss may have had and ignitor.
Boilerpro
The Goss may have had and ignitor.
Boilerpro
0
Comments
-
I have one, interchangable tips, TURBO_TORCH. I love it.0 -
I have a Goss
on my actylene B tank. The ignitor is built into the tip which fits into thr Turbo Torch handles also.
I'll bet they make a LP version, although actylene burns much hotter.
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0 -
have three
diff tips for mine. I even silsolder up top two inch. Solder up to three. Don't like the igniter though, doesn,t last long0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 891 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements