Heatway Onyx

Kathryn Maxwell · July 2002

I installed Heatway's Entran Onix about four years ago and had flow problems from the beginning. A couple of weeks ago we broke up the gypcrete floor and pulled up the tubing. It appeared to have bubbles on the inside, as if the laminating process was faulty. I would like to know if anyone else has had a similiar problem.

Thanks, Kate

Joel_3 · July 2002

So your saying that these bubbles are on the inside. In other words externally it looks fine? what type of water temps did your system run at? What kind of boiler? is the tubing brittle? More info please ,inquiring minds want to know! Thank you.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Joel_3 · July 2002

bubbles?

So your saying that these bubbles are on the inside. In other words externally it looks fine? what type of water temps did your system run at? What kind of boiler? is the tubing brittle? More info please ,inquiring minds want to know! Thank you.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

hr · July 2002

I'd be curious as to

the fluid in the system. Do you have any left that could be tested. Do you know what the system was filled with and if it was cleaned and flushed at the installation?

Did you try Watts Radiant for answers. Their phone # should be onthe hose. Let us know how you make out.

hot rod

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Heatway Onyx

Welcome

Comments

Welcome

Quick Links

Categories