Wanted - Carlin G3B burner
Hoping someone may be able to help. Biasi boiler was fired using the now antiquated G3B. Few years ago I was not able to find a blower motor for it so I installed a new EZ Gas Pro supplied by Biasi. Has been reliable however there is a real distinct rumble while it runs. Finally found a blower motor and returned the G3B to service with an updated ignition control module with post purge. The million dollar question.... Does anyone happen to have any of these old G3Bs collecting dust that they would like to sell?
Appreciate any help! Chris
Comments
-
What were the combustion numbers with the EZ Gas? I'm sure the rumble is curable.
0 -
-
I’ll send one for $300, you pay the shipping
0 -
Here are the numbers when I first got it running. Blanket in the bottom did not help much nor did removing the baffles.
0 -
How far from the north Hampton airport (on the river) are you? I could fly down and grab it if it makes it easier.
0 -
-
Cash money. No backsies. Who's buying lunch? I'm feeling like a lobster roll would hit the spot.
1
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements