Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Old Watts LWCO sill available

Options
2»

Comments

  • mattmia2
    mattmia2 Member Posts: 16,357

    so it is running millivolt total shutoff with a combination valve now?

    GW
  • GW
    GW Member Posts: 5,177
    IMG_2364.jpeg IMG_2372.jpeg IMG_2369.jpeg IMG_2371.jpeg IMG_2368.jpeg IMG_2366.jpeg
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
    mattmia2
  • GW
    GW Member Posts: 5,177
    IMG_5043.jpeg IMG_5044.jpeg IMG_5045.jpeg IMG_5046.jpeg
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
    mattmia2
  • GW
    GW Member Posts: 5,177
    edited February 3

    yes we got rid of the full time pilot line, plugged it off at the old Petcock. We snugged the pilot assembly into the new valve. I was going to tie the vent line in, but then realized that thread was much smaller. I talked to RobertShaw, he told me it wasn’t necessary.

    The stat is a T87. If the system continues to act up, I’ll scrutinize that a little bit. The safety circuit is pretty basic, vapor stat, lower , and then thermostat or the other way around, it doesn’t really matter. It’s just a circle.

    I stuck my Seitron down its throat and the numbers were amazingly good. Super low CO.

    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
    mattmia2
  • mattmia2
    mattmia2 Member Posts: 16,357

    is that extra aluminum tubing a pilot lighter or is that just abandoned vent lines?

  • GW
    GW Member Posts: 5,177

    it's abandoned

    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com

Categories