Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
HTP Phoenix PH160-80 Combustion Blower
Options
tcassano87
Member Posts: 116
Anyone Familiar with this commercial water heater, and HTP Phoenix PH160-80
Or more specifically replacing the Combustion blower?
Seems simple and straight forward but figured I’d ask in case anyone has any tips and tricks they’ve learned through experience with them
0
Comments
-
Simple enough. Use all new gaskets.
Do you have a combustion analyzer?
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
yup yup, combustion test should be done after replacement?
0
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 430 Carbon Monoxide Awareness
- 122 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.9K Gas Heating
- 116 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 395 Solar
- 15.9K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 52 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements