HTP Phoenix PH160-80 Combustion Blower
Options
tcassano87
Posts: 164
Anyone Familiar with this commercial water heater, and HTP Phoenix PH160-80
Or more specifically replacing the Combustion blower?
Seems simple and straight forward but figured I’d ask in case anyone has any tips and tricks they’ve learned through experience with them
0
Comments
-
Simple enough. Use all new gaskets.
Do you have a combustion analyzer?
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
yup yup, combustion test should be done after replacement?
0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 134 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements