EnviraCOM™ diagnostic tool?
Is there a interface tool that plugs into the Honeywell R7284 series primaries, the ones that do not have a display? Reading through the manual there is an Eviracom Diagnostics port. It would make sense that there would be a tool to plug into it, kind of like you have for the Beckett 7505 series.
I've searched around and all I'm coming up with is thermostats
Comments
-
Yes there is one. Probably not made anymore. And probably more money than just switching the primary to a new Carlin or Genysis.
It looked like a pen, I think it only read voltage and ohms, and gave you error codes. Barely helpful. And didn't work on all Evirocom ports.
I know I have one buried in my truck somewhere.
I bet @Robert O'Brien has one somewhere.1 -
Thank you! I was starting to feel like I couldn't use Google any more :D
0 -
I tried googling just for an image but couldn't find one. Samco Electronics used to sell them along with an OnWatch, but googling that turned up nothing either. I smell a conspiracy…lol.
I found mine (I knew I had one). As you can see, maybe used once.0 -
I can see why you dint use it much. I'm disappointed in Honeywell on this one. It is what it is.
Thanks man!
0 -
Envirocon was more useful on its other controls.
1
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 134 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements