Recommendations in Fairfield Co. CT?
Church in Bridgeport, CT
Approx 1 MMBTU/hr boiler off the top of my head.
1400-1500 sq ft EDR attached radiation (in theory, however a few cracked and valved off rads)
Boiler is oversized by a fair deal - wasn't my doing. Adopted it this way.
One pipe parallel flow
Looking for recommendations for service contractor in the area.
I have a working knowledge of steam and am an engineer by training. I volunteer for the church and have a list of issues that need fixing. I can provide extensive technical details and information. I have babysat this system for 7 years.
Comments
-
There used to be someone in that area that hung out here, but I don't remember the name. Maybe @Jamie Hall will remember or know someone. You can also try @Charlie from wmass he works in CT some but is some distance away. You can PM him.
People that know steam are scarse and retiring.
0 -
-
Thanks guys for your recommendations!
0 -
@Mad Dog_2 did not know that. That's good. The Gold Coast has a lot of work and apparently no one there.
1
Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 118 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 113 Geothermal
- 164 Indoor-Air Quality
- 3.7K Oil Heating
- 73 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements