Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Burnham MPO

BDR529
BDR529 Member Posts: 355
in Oil Heating

Anyone running a MPO189DV with the NX? Those Hagos are gold and Beckett seems to be scalping them.

Comments

  • HydronicMike
    HydronicMike Member Posts: 172

    Are you running it direct vent? If not, I wouldn't. If you can't get a Hago, you'll have to substitute and test.

    techforlife
  • BDR529
    BDR529 Member Posts: 355

    Direct vented, yes for 8 years+ , No other option, Runs incredibly well..

    No Riello option either, NX or nothing.

    The Hago is magic in this application.

  • Steamhead
    Steamhead Member Posts: 18,050

    Which Hago do you need?

    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • HydronicMike
    HydronicMike Member Posts: 172

    You haven't tried or won't try a different (substitute) nozzle? If you called Beckett, they'd probably tell you to try a solid Delavan, do full combustion and go from there.

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 11,273

    Are Sid Harvey labeled nozzles still rebranded Hago nozzles?

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • techforlife
    techforlife Member Posts: 125

    Hago H, SS, ES, P, B, what you looking for?

  • BDR529
    BDR529 Member Posts: 355

    Hago 100 45 B Nothin at Webb CD either. Very little Hago stock at Sid Harveys, Webb nozzles were rebraded Hagos as well, nothing in stock even the common players. 80 degreee H,B forget the SS

    Most supply houses tell you they have it but you ask them to confirm it is not a Delavan and, well.. "It says you can run that" I know how that goes.

    Not trying a different nozzel and going down the combution test route. there is a reason why Beckett chose Hago. Boiler runs Flawless.

    Dose Beckett have them? Yes. Beckett is scalping them, Through the roof special order. Buderus LoNox territory and then some.

  • Steamhead
    Steamhead Member Posts: 18,050

    Danfoss bought Hago some time ago and discontinued a bunch of their product lines.

    If that were my customer and I couldn't get the Hago, I'd try a 1.00x60B Delavan. This sounds screwy, but as I understand it, for an advertised spray angle Hagos were actually a bit wider than Delavans. Of course I'd verify it with a combustion test, as I always do.

    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 18,832

    Nozzles last a long time as long as you have clean oil. No need to change them every year. They can go for years.

  • HVACNUT
    HVACNUT Member Posts: 7,081
    Screenshot_20251011_064907_Samsung Internet.jpg Screenshot_20251011_064951_Samsung Internet.jpg

    The squeeze is on.

    Robert_H

Categories