Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

pls help me id "epoxy" substance

307TurboFire
307TurboFire Member Posts: 25
in Pipe Deterioration

Hi, "epoxy" repair on a pipe dried off-white, matte, slightly soft and rubbery to the touch. At a distance, it looks exactly like cake icing. I'm not an expert, but it does not look like any "epoxy" I have ever used. It seems more like some kind of tough 'n' stretchy elastomer paste?

If you have any idea what this could be (brand/mfr/product name), please let me know. I am trying to match the repair.

Comments

  • pecmsg
    pecmsg Member Posts: 6,583
    edited October 3

    epoxy repair

    Waste of time!

  • Larry Weingarten
    Larry Weingarten Member Posts: 3,972

    Hi, What's under that "epoxy"? Is it metal? Certainly there are better ways to fix it. 😇

    Yours, Larry

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 18,842

    Sounds like white silicon.

  • PC7060
    PC7060 Member Posts: 1,748

    pictures?

    mattmia2
  • 307TurboFire
    307TurboFire Member Posts: 25
    edited October 4

    iron pipe. someone else did this and I have to add to it/replicate now. hard to describe and I'd rather not post a photo.

    It's really in a whole other tougher realm than white silicone caulk, which I was just using today, for caulking siding.

    It seems like an incredibly tough rubbery paste, albeit, I have not tried to remove it. It was applied broadly to both sides of a crack. I suspect maybe it is JB Water Weld? But I have no experience with that yet. My only experience with epoxy is something that cures pretty hard to the touch and is usually shiny, not kind of soft and matte.

  • Larry Weingarten
    Larry Weingarten Member Posts: 3,972
    edited October 4

    Hi, Can I hazard a guess that this is a drain line? If so, A good fix would be to cut out the cracked part and use no-hubs to replace the pipe. Some Band-aids like stretchy silicon rubber tape can last a very long time, but are still considered a patch. As the cast iron loses integrity, other problems like sagging can crop up, which is a reason to go with the most durable fix. In the long run, this will save you time.

    Yours, Larry

    GGross
  • 307TurboFire
    307TurboFire Member Posts: 25

    Thank you for the suggestion. It was not my idea to patch it like this. I am just trying to follow up.

    After a lot of research, I think odds are it was JB Water Weld epoxy "putty" that was not quite mixed in the right ratio. Several people on the interwebs mention it ending up rubbery to the touch, rather than hard, if the ratio is off. The rubbery texture is why I did not imagine it to be epoxy. I just figured it was something else entirely, some kind of elastomer or something.

    Thank you for the tip on potential sagging. I appreciate.

  • mattmia2
    mattmia2 Member Posts: 14,609

    some epoxies like plastic welder types are rubbery even when mixed in the right ratio. maybe it is plastidip.

Categories