Makeup air inlet
This may be a stupid question but what do I use outside for an air inlet on a 6" pipe that's feeding make up air to an enclosure I'm exhausting 400 CFM from?
I know what to use as an exhaust damper but I've never seen anything as an inlet damper / screen.
Rain isn't a huge concern.
Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
Comments
-
Chris,
I've used hoods by Artis Metals. Look up SWVA 6, this would be a standard wall hood with screen. They have other models with a reversible damper along with other sizes. Check out their site, maybe you will find something that will work for you
1 -
I have seen them mostly in sheetmetal fitting catalogs. I don't think a damper would be code unless it is motorized and interlocked to the appliance. Also look around where you see fan in a can products.
0 -
-
I don't think there's any code that covers what I'm doing. 😉
Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
0 -
6" dryer vent with screen, pull the flapper out.
1 -
Oh, it isn't to meet the code that requires exhaust fans over i think it it 400 cfm have a makup air supply?
0 -
No idea,
Is that residential? Commercial? We do not have any atmospheric burners.
This fan is rated 389cfm.
Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
0 -
Interesting.
No, the inlet is to stop the fan from pulling conditioned air out of the building.
It's a long long story.Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
0 -
<gets popcorn>
I'm ready!
1 -
Is this the thing about various pieces of process equipment adding humidity and heat to the air in your shop?
1 -
yep
But I have concerns about temperature variations from outside effecting tolerances.
So, we'll see.Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
0 -
vs the ones from friction?
0 -
I'm sure we can come up with something dinne that'll make Rube Goldberg proud.
1 -
The problem is making the fan pull air from where you want it to come and not where the air wants to come from.
Would an ERV make sense?
0 -
They also offer a (FAV) Fresh Air Ventilation System that gets ducted to the HVAC return.
0 -
There are a bunch of options for vents and dampers here:
You can get one with a screen and a flap then put a screw in the flap to hold it open.
0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 134 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements