Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Fred Lintstone, hard at work

STEAM DOCTOR
STEAM DOCTOR Member Posts: 2,349
in THE MAIN WALL
IMG20241126153739.jpg
delcrossvMad Dog_2SuperTech

Comments

  • STEAM DOCTOR
    STEAM DOCTOR Member Posts: 2,349
    edited November 2024

    Saw this atrocity at a job site yesterday

    ethicalpauldelcrossvMad Dog_2
  • delcrossv
    delcrossv Member Posts: 2,117

    😲😲😲

    Trying to squeeze the best out of a Weil-McLain JB-5 running a 1912 1 pipe system.
  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 10,367

    That is what sheet metal workers do for a living.

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • Steamhead
    Steamhead Member Posts: 17,735

    Sure it wasn't Beavis & Butt-head? 😫

    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • guzzinerd
    guzzinerd Member Posts: 334

    Exhaust?

    Bryant 245-8, 430k btu, 2-pipe steam in a 1930s 6-unit 1-story apt building in the NM mountains. 26 radiators 3800sqf

  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,023

    Flex-abuse.....giving carte Blanche to the shoemakers out there. Mad Dog

    Consulting by Mad Dog & Matt Jr.
    SuperTech

Categories