Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Gas Water Heater Thermostat

Options
Big Ed_4
Big Ed_4 Member Posts: 3,448
in Domestic Hot Water

Is there a tool to remove and instal the newer thermostats ?

There was an error rendering this rich post.

Comments

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 11,826

    I think they surround those in breakable plastic so you need to buy a new water heater when the gas valve goes bad.

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • Larry Weingarten
    Larry Weingarten Member Posts: 4,049

    Hi, I see that a number of places on the web suggest putting a 1/2" pipe in the gas port to use as a lever. Seems like a great way to crack the valve, but if you're replacing it anyway… My approach in the past has been to use a big monkey wrench.

    Yours, Larry

    HVACNUT
  • Big Ed_4
    Big Ed_4 Member Posts: 3,448

    I was hoping for a tool , only the 24" jaws work , and the body is plastic . The 4 plastic tabs that Ed mentioned ? What for ? I thinking the 1/2"nipple for now … Thanks

    There was an error rendering this rich post.

  • STEAM DOCTOR
    STEAM DOCTOR Member Posts: 2,560

    I have used the 1/2" nipple trick. With no issues.

    Larry WeingartenHVACNUT

Categories