Viessmann cast iron boiler replacement.

JohnNY · October 3

Here's an interesting one…
My client is absolutely in love with this Viessmann Atol boiler but now that it's 32 years old, it's showing its age, and not quite as reliable as it once was.
It's been working all it's life on ODR, no thermostats, and a three way mixing valve for boiler protection.
We're both sorry to see it go, but it's time.

SuperTech · October 3

Thats a shame. Looks good and I love how it's setup.

What are you planning on installing in its place?

JohnNY · October 3

I'm not sure yet but I'm probably going with a Weil-McLain CGa with pri-sec piping and a simple Taco PC700 boiler control.

delcrossv · October 3

What's the matching tank next to it? Buffer?

GGross · October 3

https://forum.heatinghelp.com/discussion/comment/1812885#Comment_1812885

I believe that is a Verticell indirect water heater

GW · October 3

atmospheric with all the paint and such

psb75 · October 4

Sorry it can't be Viessmann for Viessmann.

But I understand. It's now Carrier, anyway.

HVACNUT · October 4

@JohnNY , is the Viessmann also atmospheric? I see its labeled NOx, and I've never seen that model before.

hot_rod · October 4

Some of the Crown boilers had those wet based sections, made by Viessmann in them. A rock solid boiler.

The smaller residential models Atolas had a 3rd aquastat that provided boiler protection by shutting off the circulator. All the aquastat sensors cap. tubes went into a triple well.

Interesting steel parts on the work bench?

mattmia2 · October 4

https://forum.heatinghelp.com/discussion/comment/1813015#Comment_1813015

Now that you have me looking, what is with the lower ledge on the bench?

HVACNUT · October 5

https://forum.heatinghelp.com/discussion/comment/1813017#Comment_1813017

Looks like a Hot Surface Igniter.

JohnNY · October 5

https://forum.heatinghelp.com/discussion/comment/1812973#Comment_1812973

Yes, it is atmospheric and I hadn't seen it either until now. It was a big deal in its day

gyrfalcon · October 5

@JohnNY , are you going to show us the pics of the new installation? Is the indirect being replaced too?

ScottSecor · October 5

First of all, fantastic photo taking advantage of the natural light. Amazing how much a great photo shows all of the details. I especially liked the item that appears to be a flywheel on the back of the workbench. Timer near the boiler is intriguing as well.

JohnNY · October 5

https://forum.heatinghelp.com/discussion/comment/1813099#Comment_1813099

So glad you noticed, Scott. :)

Thanks!

There’s a little vignetting here as well

Alan (California Radiant) Forbes · October 5

The boilers last forever. The controls don’t.

I’d be tempted to install a Vitocrossal CU3A. Old school, high water volume.

JohnNY · October 6

https://forum.heatinghelp.com/discussion/comment/1813144#Comment_1813144

I'm tempted to install a Weil-McLain Ultra, or a Lochinvar Knight, or a Viessmann B2HE…
The customer just isn't going to spend the money on a repipe to an HE installation. We're also re-using the indirect water heater.

GW · October 7

John the CU3a can be piped like any old school boiler, if leaving the piping as is keeps costs down. It’s hard to imagine the owner paid large dough 30 years ago, and now wants to go on the cheap- give him the best!

It’s like pulling a G115 or an EK and installing a Smith or a Utica😀

humbly, the European boiler proponent

Mad Dog_2 · October 8

Unfortunately, very few people put a value on their heating system anywhere close to A new kitchen, bathroom, car, boat, et cetera. At best, it's a necessary evil and at the bottom of the Totem pole. Sad but true. Mad Dog

GGross · October 8

I just wish they had put that new control on the CU3A

Viessmann cast iron boiler replacement.

Comments

Categories