First Stillson Wrench
Comments
-
Nice! The rest of the story:
Retired and loving it.
1 -
-
Thanks, Dan.
0 -
DH> "…reach into your toolbox for that durable Stillson wrench that will forever carry its inventor’s proud name."
But because toolmakers are not lawyers, and allowed another company to make this type wrench for 20 years without objection, Stillson lost (never had) a Trademark.
0 -
What is the ball and ring thingie for?
0 -
My grandfather always called it that, my response was always "dont you mean a pipe wrench?"
Another thing that comes to mind was the blacktop driveway or asphalt he would always say "macadam", I guess Tugboat engineers had their own way of saying things. "Remember Fred, we had no Home Depot on the tugboat, we had to use what we had."
Long Island, NY
1 -
'Round here that stuff is "hot-top".
Which is going out of style because they are moving from hot tar to emulsion binders. But I bet the name sticks.
0 -
This may give Stillson a run for the money as the first. Credit Leonardo da Vinci.
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
2 -
I visited this museum when Max worked in Italy. It supposedly has an example of each of his inventions. Lots of war machinery surprised me
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
a run for the money as the first.
Hardly the first. Just used a LOT.
Thanks! I'd never seen that type, even (AFAIK) in Maine antique tool shops.
0 -
It had a wooden handle that was burned off in the Patent Office fire. Those were the end caps.
1 -
Macadam was the invention of John Loudon McAdam, it's a method of laying crushed stone to make a surface that stands up to vehicle traffic and weather.
With the advent of motor vehicles, dust became a problem. It was found that spraying the macadam with tar would keep the dust down. The resulting surface was known as tar-macadam, or tarmac for short.
2 -
This particular Da Vinci museum is in France at Da Vinci’s home for the last 3 years of his life. Yes, lots of war machinery; the first machine gun, tanks, temporary bridges ……. Back then, if you wanted to attract the king’s attention for support of your inventions, you showed him quick ways to kill the enemy because France was constantly at war; mostly with England.
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements