Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Can Mepco 1E steam trap be mounted sideways?
KarlW
Member Posts: 184
As the title says, I was out today when a plumber installed the pictured trap - fixing my (somewhat expected) failure. Do you know if the trap will work mounted in this orientation? I don't see anything from literature online, so I am reaching out here.
Thanks in advance.
Thanks in advance.
0
Comments
-
No. That is not designed for that application. They make horizontal mounted steam traps0
-
MEPCO makes corner traps for just this purpose:
https://www.statesupply.com/mepco/steam-trap/radiatorAll Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting
1
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 110 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 978 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements