Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

NYC - Cost of DOB permit to repair or replace gas piping/pressure test.

macavelly
macavelly Member Posts: 2
I recently had a fire on the outside gutter of my house in NYC (the fire never got inside, only burnt the gutter) and ConEd pinned the gas meter regardless.

They sent a letter stating need a licensed plumber to repair or replace all defective equipment and as part of the self-certification process, the plumber is responsible for submitting a pressure test affidavit, letter of intent, or DOB Certificate.

I email two plumbing companies and without even an on-site visit, one said just for the permit alone would be $4500 and the other said $3800. Any repairs that needs to be done would be an additional cost.

Is the permit cost really that high?

I looked at the NYC DOB website and it states a Limited Alteration Application (LAA) permit ranges from $130 to $280. LAA permits are used for:

Plumbing work
Fire suppression piping replacement and repairs
Oil burner installations that do not include construction work

Welcome

It looks like you're new here. Sign in or register to get started.

Comments

  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,075
    We don't discuss pricing here but I will say this.  To run a legit NYC Plumbing business is a fortune.  That actual permit is a small part of the fee. The Great cost is in paying an expediter, having your men wait around all day for inspectors and the Gas utility,  Parking tickets...et al.  Its a nightmare.  Mad Dog πŸ• 
    GGross
  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,075
    D.O.B. will tell you between 8-3pm and many times never show up. Gas utilities do it too!  Thats! What you're really paying for.  There are several VG NYC LMPs here.  Try them.  Mad Dog πŸ• 
    GGross
  • macavelly
    macavelly Member Posts: 2
    Thanks for your response.

    I used the search feature on the website (https://www.heatinghelp.com/find-a-contractor/state/NY) but no luck yet.

    If there are any NYC LMPs here that would like to reach out I can send you more specifics with pictures of the gas lines etc (I only have a furnace, boiler and stove). And I have a driveway that you can park on, so you wouldn't have to worry about parking tickets :)
    Mad Dog_2
  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,075
    I don't know how you missed them.  Stanby...Mad Dog πŸ• 
  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,075
    Go on Find a Contractor New York put in the 50 mile radius search.  There are atleast a half a dozen of those guys that are NYC LMPs.  Good luck.  Mad Dog πŸ• 
  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,075
    Search New Jersey too..Some of those guys are 5 minutes over the bridge and are NYC LMPs...Mad Dog πŸ• 

Welcome

It looks like you're new here. Sign in or register to get started.

Welcome

It looks like you're new here. Sign in or register to get started.