Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Which 2 or variable speed Heat Pump condensers can use old 2-wire connection to the air handler?

Which 2 or variable speed condensers can use old 2-wire connection to the air handler?

I heard that Trane has such a unit. It is hard to pull new wire to this location. Need the system to be a heat-pump to qualify for the large rebate.

Welcome

It looks like you're new here. Sign in or register to get started.

Comments

  • Harvey Ramer
    Harvey Ramer Member Posts: 2,261
    This will do the trick and give you more options. 
    https://www.fast-stat.com/
  • rsilvers
    rsilvers Member Posts: 182
    Excellent tip. I should have thought of that as I installed two of their units for thermostats before.

    I may want a variable speed inverter condenser though - and I think that means a communicating system with data. So far, only Trane seems to do that with two wires.

    For distributors I use FWWebb or SupplyHouse, and neither does Trane, so looking for other options. Or I could just get a two-speed and use Fast-Stat.
  • rsilvers
    rsilvers Member Posts: 182
    This is a full inverter that goes down to 25% power and is non-communicating, which probably means it can somehow work with the Fast-Stat. It is the weekend or else I would be calling them.

    https://www.morleyassociates.com/wp-content/uploads/2021/03/02-EODA18H-4860-Submittal-20191015-1.pdf
  • rsilvers
    rsilvers Member Posts: 182
    Goodman makes a 2-wire communicating full inverter, so that is an option.


  • Harvey Ramer
    Harvey Ramer Member Posts: 2,261
    Daikin SkyAire or VRV4s uses 2 wire communication. It's available with a vertical airhandler. 
    http://daikinac.com/content/light-commercial/skyair/skyair-system-heat-pump/
    rsilvers
  • Larry (from OSHA)
    Larry (from OSHA) Member Posts: 733
    The Bryant/Carrier inverter AC (5 stage) is 2 wire and I think the heat pump is too. Installed one last season and works very well.
    rsilvers
  • ChrisJ
    ChrisJ Member Posts: 16,568
    The Goodman system I installed in my own house has the option for a 2 wire communicating setup but I've never used it.

    The only reason I didn't use it was I didn't want to have to use their re-badged thermostat. I don't remember who made it, but I didn't want to be locked into only using that one. So, overall a very minor, maybe even silly reason.

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

Welcome

It looks like you're new here. Sign in or register to get started.

Welcome

It looks like you're new here. Sign in or register to get started.