Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Hydronic valves

Options
BardonHVAC
BardonHVAC Member Posts: 1
in THE MAIN WALL
Can anyone tell me about the valve  lower part of the picture it has an H on it.  Hydronic heating loop

Comments

  • JUGHNE
    JUGHNE Member Posts: 11,447
    The lower left device looks like a quarter turn plug valve for balancing flow.

    Loosen the nut and rotate the slotted plug with a screwdriver.
    Slot parallel with pipe is open....perpendicular is closed.

    Usually not 100% shut off but close.

    Top left may be for bleeding air?...1/4 turn also.
    EBEBRATT-Ed
  • hot_rod
    hot_rod Member Posts: 25,234
    The top valve also look like a gauge cock. If it is bushed down to 1/4” it may have been used to check pressure

    Or a manual vent port
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories