Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Amtrol boilermate gasket
Options
kcopp
Member Posts: 4,433
This past week I have had 2 cases where the gasket to the Amtrol CH series indirect has failed. I have tried to replace this gasket in the past w/ less than great results.
The gasket is relatively thin for this.
Anyone else had/ witnessed this?
Any hints to a successful water-tight repair?
The gasket is relatively thin for this.
Anyone else had/ witnessed this?
Any hints to a successful water-tight repair?
0
Comments
-
No takers?0
-
Are you talking about the inlet/outlet fittings/gaskets at the top? I only have a few in my customer base, no gasket issues.
There was an error rendering this rich post.
0 -
Yes. Where the big coil bolts down to the tank. I have a few out there and yes not a lot of issues. Just odd 2 in one week.
I did try once before to repair and it did not work0 -
these tanks were known for premature failure. We used to call the the "atom bombs" because of their shape. I'd replace with a stainless indirect and enjoy longevity.
0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements