Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ridgid ProPress service.

PC7060
PC7060 Member Posts: 1,622
edited December 2022 in THE MAIN WALL
I’ve got a Ridgid RP 241 compact press tool which typically works flawlessly with the exception of 3/4” fitting. 

The jaws took a beating on a job a couple of years ago and have never been the same. Before I pop for a new set I’m considering sending both the tool and the jaws off for service / calibration. Has anyone on the site sent their Press-tool off and if so where did you get it serviced?

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    edited December 2022
    Where are you located?
    These guys are great, and have great prices on tools. I got my 340 for over $500 less than I could find in any store or online.
    I’d call first. They are pretty easy to talk to on the phone. Not the usual grouchy guy at the supply house.

    https://www.jekk-tools.com/tool-repair2.html

    There was an error rendering this rich post.

    PC7060
  • kcopp
    kcopp Member Posts: 4,544
    I purchased mine through FW Webb. They also arrange the service. No issues. Happy to do it.
  • Long Beach Ed
    Long Beach Ed Member Posts: 1,752
    The repair service on my ProPress was quoted so high I found one with a broken case on ebay and switched the guts.
    PC7060

Categories