Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Wiring zone valve in Crown Boiler AWR series

Options
videoshim
videoshim Member Posts: 3
in Gas Heating
Hello everyone. I purchased a new gas boiler(Crown AWR series) and replaced my old one recently. I am very happy with its efficiency. However, I need help finding a solution to wiring it to my old zone valve. I only have one circulator and 3 zone valves which are Honeywell v8043s. Now I open all zones manually and use one thermostat temporarily. But I want to wire it to 3 zone valves and three thermostats. Thank you.

Seong

Comments

  • Ironman
    Ironman Member Posts: 7,376
    Options
    Get a Taco ZVC4 zone control panel and follow the wiring instructions.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 7,900
    Options
    The instructions that come with the Honeywell zone valves (also available on line) is easy to follow, OR you could get a Zone Valve control panel like the Taco ZVC-403 (or ZVC-404 if you plan to add a zone in the future) to make for easy trouble shooting in the future.

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 7,900
    edited December 2022
    Options
    This is the diagram to use a Zone Control



    This is the diagram to wire without the zone control


    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

Categories