Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Strut bracket

Snowmelt
Snowmelt Member Posts: 1,428
edited August 2022 in THE MAIN WALL
I saw on a Facebook group this particular bracket. Then I see it for off the wall price to descent price. I’m In New Jersey. Would west side have this? Who would have this if not west side who would?

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • mattmia2
    mattmia2 Member Posts: 12,975
    grainger, electrical supply houses. can get the part number from the unistrut catalog and go from there. the size of the channel will make a huge difference in price. could just make it from a corner bracket too
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,456
    We call them standoffs and buy them at Cal Steam (Ferguson). 
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 17,944


    They make these if you need heavier duty.

    They are more for floors than walls and cost $$

    Any place that sells strut, electrical, hvac and pipe shops and industrial suppliers like Fastenal, MSC. Weather they are in stock is another story
  • HomerJSmith
    HomerJSmith Member Posts: 2,640
    I always make my own out of B-line channel. I get the length I want then.
  • ScottSecor
    ScottSecor Member Posts: 987
    I'm not sure if West Side carries them. I am certain they do carry a lot of Unitstrut fittings and channel. I would call them and ask, most of the staff is very knowledgeable.

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories