Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Strut bracket

Options
Snowmelt
Snowmelt Member Posts: 1,416
edited August 2022 in THE MAIN WALL
I saw on a Facebook group this particular bracket. Then I see it for off the wall price to descent price. I’m In New Jersey. Would west side have this? Who would have this if not west side who would?

Comments

  • mattmia2
    mattmia2 Member Posts: 9,724
    Options
    grainger, electrical supply houses. can get the part number from the unistrut catalog and go from there. the size of the channel will make a huge difference in price. could just make it from a corner bracket too
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,026
    Options
    We call them standoffs and buy them at Cal Steam (Ferguson). 
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,585
    Options


    They make these if you need heavier duty.

    They are more for floors than walls and cost $$

    Any place that sells strut, electrical, hvac and pipe shops and industrial suppliers like Fastenal, MSC. Weather they are in stock is another story
  • HomerJSmith
    HomerJSmith Member Posts: 2,460
    Options
    I always make my own out of B-line channel. I get the length I want then.
  • ScottSecor
    ScottSecor Member Posts: 862
    Options
    I'm not sure if West Side carries them. I am certain they do carry a lot of Unitstrut fittings and channel. I would call them and ask, most of the staff is very knowledgeable.

Categories